FLASH/STROBE
Flash System Overview
The photo booth is equipped with three flash units: two main flashes positioned at the top and one bottom flash.
4.1 Cables
Each flash has two cables connected:
a) Power supply (230V or 110V)
b) sync cable
Cable (a) supplies power to the flash unit, while cable (b) sends the signal to fire the flash.
Note: Some systems use an Optical Slave mode, where a flash is triggered automatically when it detects another flash firing.
Inside the camera, there is a microswitch that sends a signal through the sync cable, triggering the flash at the correct moment.
If a flash stops working, you can easily replace it with a similar unit.
6.2 To replace a flash:
-
Unplug the power and sync cables from the faulty flash
-
Unscrew the flash from its mounting
-
Install the new flash
-
Reconnect the power and sync cables
6.3 change tube
6.4 strobe trigger